High Lifter Lift Kit for Kawasaki 750 Teryx 4-Seater - Signature Series - Manual (Page 3)

3
Front Lift Installation
1) Place jack under center of UTV front end and lift until front wheels clear the ground. Be careful to
support the UTV properly so that it is securely supported but so that A-arms and shocks can droop to
full extension.
2) Remove front wheels and lower portion of shock from the A-arm.
3) Slide bottom of lift bracket over A-arm shock mount and insert one medium spacer between the center
of the shock mount tabs and front lift bracket.
4) Now insert the 10 x 65 hex bolt and secure the bracket and spacer to the frame with the 10mm
Locknut.