EVS XEDIO Browse Version 4.2 - June 2012 User Manual - Manual (Page 14)

Issue 4.2.B Xedio Suite Version 4.2 – User Manual - Xedio Browse
EVS Broadcast Equipment – June 2012
8
Controls Specific to the Virtual Media Player
When a virtual media is loaded on the Player, the four lower transport buttons
become trim buttons for the IN and OUT points of the virtual media:
Note
If the loaded virtual media is declared as published or the original media
is declared as treated, you will not be able to use those four buttons.
Operation User Interface
Button
Remove 1 frame from
Mark IN point
(grey)
Add 1 frame to Mark
IN point
(grey)
Remove 1 frame from
Mark OUT point
(colored)
Add 1 frame to Mark
OUT point
(colored)
2.3.2 T
IMECODE
V
ALUE
F
IELDS
Three Timecode Value fields are displayed under the Transport buttons.
Area Description
1. Media Start Timecode (first recorded frame), even if a virtual media is
loaded
2. Current Timecode position (nowline)
3. Media End Timecode (last recorded frame), even if a virtual media is
loaded.