EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 71)

Setting Name Basic Advanced
Technical
Setup
Subnet Mask X X
Default Gateway X X
3.3.2. Video Codecs and Reference
Video and Reference Settings
Introduction
The Video and Reference settings are available on the Server tab in the server-based
application (1st page) and web-based interface. These settings are not available in the
Technical Setup menu of the Remote Panel.
Warning
Most Video and Reference settings (all except Sync PC time and Genlock)
require an application reboot (ALT+Q from the operational windows) for changes
to be taken into account.
The Video and Reference settings are highlighted in the screenshot of the server-based
application shown below:
Field Rate
Description Field frequency used (Hz).
Both field rate and resolution give the video standard.
Values 50.00 Hz (PAL) - default
59.94 Hz (NTSC)
59.94 Hz (J)
CONFIGURATION MANUAL XSnano Server 11.02
3. Multicam Configuration 63