EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 163)

Confirm delete clips/playlists
Description Enables a confirmation request when users delete clips,
playlists or in both situations.
Values The following values are possible:
• Off:
Clips and playlists are immediately deleted.
• Clips:
A confirmation is required for a clip deletion, but not for a
playlist deletion.
• Playlists:
A confirmation is required for a playlist deletion, but not for
a clip deletion.
• Clips & Playlists:
A confirmation is required both for a playlist deletion, and
for a clip deletion.
Default Values Off
Note
This parameter does not apply to the Clear Video Disks command, available in
the Multicam Setup window of the server-based application, which already has
its own confirmation message.
3.9.7. Push Settings
User Interface
The Push settings relate to the management of the Push function on the EVS server. The
Push function allows users to easily send a copy of a clip to another machine on the
network via the GigE network.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 3 on the server-based application
◦ on page 1 on the web-based interface
• in the Operational setup menu of the Remote Control Panel (7.1)
CONFIGURATION MANUAL XSnano Server 11.02
3. Multicam Configuration 155