EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 137)

The following screenshot shows the RS422 VarID and the VDCP visibility settings areas,
available in the Protocol tab, in advanced mode:
VarID Definition and Parameters
The VarID is a 32-bytes ID with variable length and format. The VarID settings enable
VDCP protocol to use the VarID to access the clip IDs on a server.
This page in the Multicam Configuration menu only displays the parameter values. These
values are extracted from the ‘varid.ini’ file and can only be changed by editing this
external file. In case of error or undefined values, the corresponding parameter default
value is used.
CONFIGURATION MANUAL XSnano Server 11.02
3. Multicam Configuration 129