EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 158)

Playlist Receive page
Introduction This setting is linked to the copy function that allows users to
automatically create a local copy of all network clips when
copying a local or network playlist. For details, refer to the
description of the Playlist copy function in the Operations
manual.
Availability The setting is only available if the license code 111 is valid.
Description Specifies on which page(s) of your EVS server the clips
received when using the PLST+CLIPS copy function must be
stored.
Clip pages can be assigned simultaneously as PUSH and
PLST Receive Pages.
Values 1 to 10 (=0)
Default value 0 (page 10)
3.9.5. Playlist Settings
User Interface
The Playlist settings relate to various aspects of playlist management and effects.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Operation tab, in the basic display mode:
◦ on page 2 on the server-based application
◦ on page 1 on the web-based interface
• in the Operational setup menu of the Remote Control Panel (3.X)
150 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013