EVS XSnano Version 11.02 - July 2012 Configuration Manual - Manual (Page 125)

3.5. Network Tab
3.5.1. Overview
Network Tab
The Network tab consists of two pages in the basic and/or advanced mode in the server-
based application. The Network tab includes the settings on the Gigabit Ethernet
network, both networks used for the backup and transfer of video and audio data.
No SDTI network is available with an XSnano server. The Net name can however be
used.
Setting List
The table below presents the settings of the Network tab. It specifies whether the setting
is available:
• in the basic or advanced display mode in the server-based and web-based interfaces
• in the Technical Setup menu of the Remote Panel
Setting Name Basic Advanced
Technical
Setup
Net name X X -
Gigabit IP Configuration settings P1 P1 T3.X
IP address X X X
Subnet mask X X X
Default gateway X X X
3.5.2. Net Name
Introduction
No SDTI network is available with an XSnano server.
The Net name can however be useful.
This field is available
• in the Multicam Configuration window, Network tab, in the basic and advanced
display mode on page 1 in the server- and web-based interfaces.
CONFIGURATION MANUAL XSnano Server 11.02
3. Multicam Configuration 117