EVS XTAccess Version 1.16 - November 2011 User Manual - Manual (Page 56)

Issue 1.16.A XTAccess Version 1.16 – User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – November 2011
54
07-Mar-2008
07-Mar-2008
The description of each XML tag is described in the ”XML Jobs” document.
9.3 LOCAL XTACCESS SETTINGS (NON XML)
Some XTAccess settings are not supported by XML. They must therefore be
specified in the local settings of the XML Jobs Scan (see section 7.3.3 ‘XML Scan
Settings’ on page 27).
9.3.1 R
EGISTRY
S
ETTINGS
• HKEY_LOCAL_MACHINE\SOFTWARE\EVS Broadcast Equipment\Common
\FileWriter NoBuffering: Specific setting to transfer a file without any
buffering. Recommended for writing on a MacOS workstation via network
(SMB). (default value = 0)
• HKEY_CURRENT_USER\Software\EVS Broadcast Equipment\XTAccess\Max
Transfer Rate: Maximum transfer rate (Bytes/second) for the total amount of
backup jobs (all together).
• HKEY_CURRENT_USER\Software\EVS Broadcast
Equipment\XTAccess\UpdateStatusXFileIfBackupSuccessful: Update
STATUSXFILE in MCCLIPTABLE when backup is successful
o
0: Active
o
1: Not Active
9.4 MISCELLANEOUS
• Remark 1: EVS, GigE and XTAccess activate time-outs when no data are
transferred within a specific time interval (typically 8 seconds). Typically,
backing up a file on a remote drive via UNC path with throughput lower than 5
Mbits/s per transfer job could trigger a time-out and then cancel the job.
Network and storage must be designed accordingly.
• Remark 2: Audio Resolution
o
In OP1A and Avid MXF format you can select 16 or 24 bits
o
In QT and QT Ref format the audio is saved in 16 bits
o
In EVS MXF format the audio is saved in 24 bits