EVS XTAccess Version 1.16 - November 2011 User Manual - Manual (Page 23)

XTAccess Version 1.16 – User’s Manual
Author: Serge Comes EVS Broadcast Equipment – November 2011
Issue 1.16.A
21
G
RAPHICAL
S
ETTINGS
These settings relate to the generation of files/clips from a picture (BMP, TIFF &
TGA formats) or audio (Wav, BWav).
Command name Description
Video System Select either Pal or NTSC, in progressive or not.
Sequence
TimeCode
Enter the value of the first TC included in the destination
file/clip.
Fill & Key encoding Check this option if you want to generate two synchronous
files/clips based on Alpha Channel: one file/clip with the
Fill sequence and one file/clip with the Key sequence.
Add Audio when
encoding Graphical
Sequence
Check this option if you want to add audio to the sequence
created with your graphic files.
The audio files must be 16-bit audio files of 48 kHz (1 to 8
channels). The file format must be Broadcast Wave
Uncompressed (BWAVE) (.wav).
Sequence Duration Type the duration (only valid for pictures, not for animated
sequences).
Default Audio
Bitmap
Select the default picture you want to add to your audio
encoding. The EVS server does not support audio only so
you have to add a graphic picture.
Some default pictures are available in the XTAccess folder
C:\Program Files\EVS Broadcast
Equipment\XTAccess\Default Picture Files\