EVS MulticamLSM Version 10.03 - July 2010 Configuration Manual - Manual (Page 88)

EVS Multicam – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
Issue 10.3.C
81
3.19.3 GPI
S
IN D
ELAY
GPI In Settings p.8.4
GPI# Delay GPI# Delay
1 [F1]Disable 5 [F5] Disable
2 [F2]Disable 6 [F6] Disable
3 [F3]Disable 7 [F7] Disable
4 [F4]Disable 8 [F8] Disable
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
Possible values: Disable (default, immediate reaction) / 00s01fr to 02s00fr
This parameter defines the number of seconds and/or frames that the server will
wait after receiving the GPI IN signal to execute the GPI-related function.
3.19.4 GPI
S
OUT D
EFINITION
GPI OUT Settings p.8.3
GPI# Function Type
1 [F1]----------- [F5]----------
2 [F2]----------- [F6]----------
3 [F3]----------- [F7]----------
4 [F4]----------- [F8]----------
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
The GPIs OUT have been implemented primarily for the Replace function. On the
IN/OUT point when executing the Replace, users can trigger GPIs OUT.
For each GPI input, the operator has the possibility to define the following
parameters:
• The function that will trigger a GPI OUT: (Empty) not used (default value) or
Replace
• The type of GPI signal that will be used. Possible values are:
o
Open-Low
o
Open-Low Pulse
o
Close-High
o
Close-High Pulse