EVS MulticamLSM Version 10.03 - July 2010 Configuration Manual - Manual (Page 69)

Issue
10.03.C EVS Multicam – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
62
3.11.4 D
EFAULT
P
LST
S
PEED
Possible values: Unknown (default), then from 0% to 100%
This defines the default speed used for clips entered into playlist. Unknown means
that the speed of the previous clip in the playlist will be used as a reference for
the current clip. 0% will force the playlist to pause at the end of the previous clip.
3.11.5 I
NSERT IN
P
LAYLIST
Possible values: After (default) / Before
This setting defines how the Insert function of playlist will be performed:
depending on the value specified in this setting, the new clip will be inserted after
or before the current clip in the playlist.
3.11.6 C
ONFIRM
I
NS
/D
EL
C
LIP
Possible values: No (default) / Yes
If enabled, a confirmation will be required each time the operator wants to add a
clip to the playlist or remove a clip from the playlist.
Playlist p.4.2
[F1]Split audio editing : Disable
[F2]Extend split transition : End Cut
[F3]Swap audio tracks : Auto
[F4]Playlist loop : No
[F5]Load playlist : Always
[F6]Playlist auto fill : All Cam
[Menu]Quit [Clr+F_]Dft [F9]PgUp [F0]PgDn
3.11.7 S
PLIT
A
UDIO
Possible values: Disable (default) / Enable
This parameter enables or disables the Split Audio Editing option in Play-List
mode. Changing this parameter modifies the display on the output monitors and
adds special function keys on the LCD screen to define different transition points
and durations on the video and audio tracks.
Note
A specific license code (option 112: Playlist Mgmt Advanced) is required
to enable split audio editing.