EVS MulticamLSM Version 10.03 - July 2010 Configuration Manual - Manual (Page 15)

Issue
10.03.C EVS Multicam – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
8
The values from the following fields can be used to automatically name clips:
Value Meaning
Disabled No name is assigned to a clip when it is created. Default value.
TC IN The timecode of the IN point of the clip is automatically assigned to
a clip when it is created.
CAM
Name The name of the recorder channel is automatically assigned to a clip
when it is created.
ID Louth The ID Louth of the clip, i.e. the unique identifier for the clip on the
XNet network, is assigned to a clip when it is created.
VarID The VarID of the clip is assigned to a clip when it is created. When
this option is selected, the VarID used to assign a name to the clip
will be limited to the first 8 characters of this field.
C
ALL
C
HANNEL
VGA
Possible values: Disable (default) / Enable
This parameter disables or enables the Call Channel function on the VGA Clip
screen. This function allows the operator to select on which PGM channel the clips
called from the keyboard/tablet and VGA should be loaded.
K
EYWORDS
F
ILE
Possible values: -------- (default), SERVER, or the name of a keywords file present
on the server.
This parameter specifies the keywords file to use to assign keywords to clips or to
search the clips database:
Value Meaning
-------- No keywords file is selected, and the keyword assignment and related
search functions are not available.
SERVER The keywords file sent by the active network server to all systems on
the network will be used.
Keyword
file
name Other file names will appear if keywords files (files with a .KWD
extension) have been loaded in the C:\LSMCE\DATA\KWD directory of
the system. Keyword files can be imported using the Import/Export
Setup Files function of the Maintenance menu of the EVS Menu (refer
to the XT Tech Ref Software manual for details).
The F8 key allows the operator to delete the selected file (confirmation
required). See also the Section ‘Keyword Management’ in the Multicam
Operational manual for more details on keywords-related functions.