EVS MulticamLSM Version 10.03 - July 2010 Configuration Manual - Manual (Page 17)

Issue
10.03.C EVS Multicam – Version 10.03 – Configuration Manual
EVS Broadcast Equipment SA – July 2010
10
2.2.7 VGA S
ETTINGS
You can also define the VGA and RMT Sync setting on page 6.2 of the setup
menu on the Remote Panel. You will find a description of these settings in the
Multicam user manual.
2.2.8 VGA & RMT S
YNC
Possible values: No, Yes, Server Nbr
This parameter selects whether and how the current clips machine, page and bank
of VGA screens and EVS Remote Panel must be synchronized.
Value Meaning
No (Default) Clip machine, page and bank can be selected independently on
the VGA screen and on the EVS Remote Panel.
Yes Clip machine, page and bank are synchronized between VGA
screen and EVS Remote Panel. Connecting to the clips of a
network machine or coming back to the clips of the local machine,
or selecting a new page or bank on one side will be automatically
reflected on the other.
Server Nbr Clip pages and banks can be selected independently on VGA and
remote, but connecting to the clips of a network machine or
coming back to the clips of the local machine on the VGA or
Remote Panel will automatically reflect on the other.
2.2.9 C
HANNEL
N
AMES
Play and Rec channels can be named (12 characters max.). The name of record
channels will be displayed on the OSD of the video output monitor when a record
train is loaded, displayed on the E/E monitoring outputs and can also be used to
name clips automatically when the Autoname Clip parameter is set to “CAM
name”.
The name of the player channel will be displayed on the OSD, but truncated to 4
characters.
Note
The channel names become very important for IPDirector usage. These
names cannot currently be defined from an IPDirector system, and must
be defined on this screen.