Committing actions in edit while playout mode, Introduction, Committing the tle – EVS IPDirector Version 6.0 - November 2012 Part 9 User's Manual User Manual
Page 20

Area
Description
4.
TLO Security
Zone
The TLO Security zone is the portion of the timeline after the TLO
nowline on which the Timeline Engine will not be able to commit
changes from the TLE to the TLO. This zone is defined by the
Timeline Engine.
5.
Uncommitted
Changes
On the timeline display, the A/V material that contains uncommitted
changes has a reddish layer, on the top of the usual element color.
1.4.
Committing Actions in Edit While Playout
Mode
1.4.1.
Introduction
The editing actions performed on the edit timeline must be committed to the on-air
timeline.
Afterwards, it is not possible to move back to the TLO as it was before the commit action.
Users have to undo the editing actions in the TLE and to re-commit to the TLO.
Editing actions performed on the TLE and not yet committed can also be canceled by
overwriting the TLE with the TLO.
1.4.2.
Committing the TLE
You need to click the
button to commit the changes from the TLE to the
TLO.
When the TLO is being played out, only the uncommitted changes located after the TLO
security zone are applied to the TLO.
When the TLO is on pause, the whole TLE is reapplied to the TLO. This commits all
uncommitted changes, without taking into account the security zone.
The following screenshots show the timeline display before and after a commit action.
Before Commit
The TLO is being played out: the TLO nowline is moving forward.
The Remaining Commit Duration extends from 11:00:28:XX to 11:00:49:XX.
12
1. Edit While Playout
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.A