EVS IPDirector Version 4.4 - March 2008 Part 4 User's Manual - Manual (Page 26)

IP Director Version 4.4 – User Manual – Part 4 – System Management & Troubleshooting
EVS Broadcast Equipment – March 2008
Issue 4.4.B
17
2.4
E NOT RUN NG I THE LIVE ZONE
recorder. The preview recorder is
defined in the 3 r d step of the ‘new log sheet wizard’: Relevant recorders definition.
XT where this recorder is located.
this recorder.
GS
e XT network and on the IP Director
he date/time on the Setup Screen in the Information
t be associated to the log.
e checks, your clips still do not associate with the clips, in the
t
Click on START.
IP LOGGER
T
H
T/C
IS NI N
‘ ’
The T/C information is taken from the preview
You must have a serial connection to the
Otherwise you do not get the information of
M
Y CLIPS DO NOT ASSOCIATE WITH THE LO
1. Date and time must be the same on th
database workstation.
o
Check the time and date on your XT server (press SHIFT-F2 on the XT server
keyboard to confirm t
Window)
o
Check the time and date on your database system
2. The date associated with a clip is the date when the clip has been created and
not the date corresponding to the A/V data. If the T/C of a log is equal to
11:00pm, and if the clip is created after midnight, the date of the clip and the
date of the log will not match and the clip will no
o
Check when the clip has been created (see in the Database Explorer, clips,
creation date) and compare that date to the log.
3. Check your clip association rule.
4. Check in the SynchroDB configuration if the parameter Auto Associate Clips
to Logs is checked.
5. If after all thos
main menu of the IP Director, select Tools > Logging Association. Force a
manual clip association to your log sheet.
o
Select the log shee
o