2 displaying video on the video display window, 3 assigning a channel to a video display, Displaying video on the video display window – EVS IPDirector Version 4.4 - March 2008 Part 4 User's Manual User Manual
Page 16: Assigning a channel to a video display, Isplay dow, Ideo on the, Ideo display, Ssigning a, Hannel to a, Ideo

IP Director Version 4.4 – User Manual – Part 4 – System Management & Troubleshooting
EVS Broadcast Equipment – March 2008
Issue 4.4.B
7
1.2.2 D
ISPLAY
DOW
be ab
lay a ch
Display
dow, a physical
the input of the IP
ING
V
IDEO ON THE
V
IDEO DISPLAY
W
IN
To
le to disp
annel in the Video
win
connection must be made from the required video source to
Director workstation A/V board.
Note
To display video on the VGA uses around 25% of the CPU power of the
sizes are used.
workstation for a display size of 384 x 288, more if a larger display is
required. The reactivity of the IP Director interface could be
significantly slower if larger window
1.2.3 A
SSIGNING A
C
HANNEL TO A
V
IDEO
D
ISPLAY
Once the physical connection is made, the Video Display panel needs to be linked
to the corresponding PGM video channel connected to the input of the IP Director
Workstation video card.
Using the Remote Installer tool, select the IP Director workstation and right click
on the IP Director box and select Edit Config.
For more information about the
Director Technical Reference.
Note
Remote Installer tool, see the IP
The IP Director Configuration window opens:
The Channel Management allows you to link a Player channel of one specific XT to
one Video Display (Video Board).