EVS XTAccess Version 1.19 - November 2012 User Manual - Manual (Page 36)

Issue 1.19.A XTAccess Version 1.19 – User Manual
EVS Broadcast Equipment – November 2012
26
• Primary TC : Saves the XT Primary TC in the video file
• LTC : Saves the LTC in the video file
• User TC: Saves the User TC in the video file
Default File Transcoding Profile
Default Transcoding profile is used for the job to file (if you have selected the 3 rd option
“Transcode the source media using …”) or for the Rendering of playlist
In this field, you have to define an XML profile file that defines the codec and parameter
of the codec used to transcode the file.
You can find some encoder profiles into the “C:\Program Files\EVS Broadcast
Equipment\XTAccess\Encoder Profiles 2.0” folder
To XT Server
Transcode Restored File
Select this option if you want to transcode the file during the restore operation.
Remove Source file if restore successful
In case of Restore and Copy, it could be useful to automatically delete the source file to
clean the source storage. The file will be removed only if the job is successful.
Default File Transcoding Profile
Default Transcoding profile used for the
job to XT (if you have selected the 3 rd option
“Transcode the source media using …”) or for the Rendering of playlist.
In this field, you have to define an XML profile file that defines the codec and parameter
of the codec used to transcode the file.
You can find some encoder profiles in the “C:\Program Files\EVS Broadcast
Equipment\XTAccess\Encoder Profiles” folder
Enable Multi-Dests
If the multi-destination is activated in the XML Scan Folder, XTAccess will use the multi-
dest template and not anymore the XML job or the XTAccess interface to define the
different destination paths.
There is one example of template in the XTAccess folder:
“C:\Program Files\EVS Broadcast Equipment\XTAccess\multi_dests_sample.dst.xm”
There is some information about the structure of the template directly in this example.
This example template will be replaced at each update of XTAccess so it is necessary to
create a copy with a different name before modifying it.
Status of the sub-jobs related to each destination defined in the template is only available
through the Notification Center and Vedio. The XML job will only contain the first
destination status.
Please contact EVS before using this option