beautypg.com

Warnings, Preventing malfunction – AASTRA DT590 for MD Evolution User Guide EN User Manual

Page 14

background image

Important

MD Evolution – Cordless DT590

144

Do not use battery packs from different types, brands or of

different capacities.

The battery is to be stored in a dry cool place, with the ambient

temperature around of +25°C (+77°F) for best performance.

The battery continues to discharge a minimal portion of its

power, even if the product is switched off or the battery is

removed.

Dispose the battery in accordance with all local regulations,

applicable in your country.

Do not allow the metal contacts on the battery to touch another

metal object. This could short-circuit and damage the battery.

Do not attempt to take a battery apart.

Do not disconnect the battery unless it needs to be replaced.

Do power the telephone off before removing the battery.

Warnings

Smoke or fumes

Stop operating the products and turn off immediately in case of

smoke or fumes. Unplug the mains adapter and remove the

batteries from the phone immediately. Continued operation may

result in fire or electrical shock.

LCD

If the liquid crystal display breaks, avoid injury by not allowing

the liquid crystal to come into contact with eyes, skin or mouth.

Prevent the liquid crystal from leaking out of the broken glass.

Preventing malfunction

Never place the equipment in close proximity of electric motors,

welding equipment or other devices generating strong (electro)

magnetic fields. Exposure to strong (electro) magnetic fields

may cause malfunction and corrupt the communication.

Moving the equipment rapidly between warm and cold

temperatures may cause condensation (water droplets) to form

on its internal and external surfaces. Water droplets may cause

malfunction of the equipment and corrupt or end

communication or damage the equipment. When condensation

is noticed, stop using the equipment. Switch off the phone,

remove the battery and unplug the mains adapter from the

power outlet. Wait until the moisture evaporates from the

equipment before putting it in operation again.