AASTRA 6730i (Version 2.5 Symbol Keypad) User Guide EN - Manual (Page 59)

Model 6730i IP Phone User Guide 51
Line Keys and Programmable Keys
Line Key
You can set a programmable key to act as a line/call appearance key on the 6730i. The key acts as
a line that behaves the same as a hard line key (L1 and L2). For more information about the
behavior of line keys, see “Multiple Line and Call Appearance Keys” on page 48.
You use the Aastra Web UI to set a Line key.
Configuring a Line Key
Use the following procedure to set a Line key on your phone.
1. Click on Operation->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be made configurable only by your
system administrator.)
3. In the "Type" field, select Line to apply to the key.
4. In the "Line" field, select a line for which to apply this key. Valid values are 3 through 6.
5. Click to save your changes.
Aastra Web UI
Note: Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY
by your System Administrator.