AASTRA 6730i (Version 2.5 Symbol Keypad) User Guide EN - Manual (Page 16)

8 Model 6730i IP Phone User Guide
Getting Started
When more than one status message displays, the 2 is shown after the message to indicate you
can use the 2 and 5 navigation keys to scroll through the remaining messages.
Incomplete Configuration
If your phone displays an "Incomplete Config" message without any extension or user name at
the end of the start up sequence instead of an Idle state screen, this indicates the phone
configuration that was downloaded from the configuration server is not complete or correct.
Contact your System Administrator for assistance.
No Service
When the phone is not properly connected to the network, or the account has not been
configured by the Network Administrator, the "No Service" or "Network Disconnected" prompt
appears on the display and the telephone status light turns ON. The phone also displays the
default time and date of 12:00am Jan. 1st, 2000. Check that the cables are tightly connected to
the phone and to the wall jack. The phone should automatically detect when the connection is
reconnected and display the "Network Connected" prompt temporarily.
If changes have been made to your phone settings, you may need to restart your phone. For more
information on restarting your phone, see “Restarting Your Phone” on page 44 .
For more information about connecting your phone, refer to the Aastra 6730i Installation Guide.
Check with your System Administrator for assistance.
John Burns
CFWD All
Jun 8 2:55pm
1
Network Connected
2