AASTRA 4425 IP Vision (SIP) for MX-ONE User Guide - Manual (Page 29)

Start the Phone – Log On/Off
Dialog 4425 IP Vision 30
If the displayed number is not yours (the telephone has been
logged on by another person): z
Dial your extension number.
The displayed number is automatically erased when you start
dialing. The display shows your entered digits. (The display menu
key Erase , is used to remove a wrong entry.)
Log on Press to log on (see display).
If a PIN or password is not required, the display shows your name
and extension number, and the phone is ready for use.
If a PIN or password is required the display shows:
Notes:
The last setting used (by previous user) remains until
changed. The request to enter a password can be
changed, contact your system administrator.
The password is obtained from, and can only be changed
by the system administrator.
The PIN is the same as the Individual Authorization Code.
Only digits can be used as PIN. The PIN must be four digits
or more. z
Enter your PIN or password.
(The display menu key
Erase , is used to remove a wrong entry.)
Telephone version note: The password can be entered
with letters or numbers, see section “ Entering names and
numbers ” on page 52 .
Log on Press to log on (see display).
The display shows your name and extension number, and the
phone is ready for use.
Settings CallList Contacts CorpDirectory Web
User not logged on!
11:06 28 03 2008
Enter password:
Erase Log on