AASTRA 4425 IP Vision (SIP) for MX-ONE User Guide - Manual (Page 26)

27 Dialog 4425 IP Vision
Start the Phone – Log On/Off
Continued startup procedure
The display shows:
A timer counts down from 5 seconds. If no key is pressed during
this time,
(No change) is selected automatically.
Notes:
You can speed up the procedure by pressing
(No change) .
The administrator mode is used to change the IP settings in
your phone. This mode is reserved for your system
administrator.
The display now indicates that the phone is connecting to the
server and the software is loading. This takes about 1 minute. After
a self test, the phone is ready for use or ready for log on. To log on,
see section “ Log on ” on page 29.
Settings CallList Contacts
Use administrator mode to change IP settings
5
(No change)