AASTRA 610d for Aastra 400 User Manual EN - Manual (Page 85)

Personalizing your phone
eud-1290/1.0 – R1.0 – 01.2011
85
Storing a function on a key - function key
You want to retrieve a frequently used function - for example "call forwarding on no
reply" - using a single keystroke rather than having to enter it by hand. Usually the
function is assigned so that you:
• activate the function with the first keystroke,
• and deactivate the command again with a second keystroke.
Formulating functions
This section explains how to activate an individual function, for example call for-
warding, using function commands and how to assign it to a key.
Function commands
You can use function commands to define a function to suit your personal require-
ments. A function can consist of one or more function commands, function codes,
and the phone number.
You can either carry out a function directly or store it on a function key (select Config-
urable function).
Keep the key you want pressed down for approx. 2 seconds.
Or:
The keys are also available via the menu: Menu > Settings > Keys > Softkeys .
Or:
The keys are also available via the menu: Menu > Settings > Keys >
Softkeys / Hotkeys / Sidekeys .
New Creating a new key assignment:
Press the New softkey or directly select the Function key , select the function
and confirm with the Save softkey.
➔
The allocated function is stored.
Modify Modify a key assignment:
Select the key you want and press the Modify softkey. Make the changes and
confirm with the Save softkey.
➔
The allocated function is stored.
Delete Deleting a key assignment:
Select the key you want and confirm with the Delete softkey.
➔
The assignment is deleted.
Note:
Besides the predefined functions you can also specify your own function. For
more information please refer to the Chapter
"Function commands" , page 85 .