AASTRA 610d for Aastra 400 User Manual EN - Manual (Page 75)

P e r s o n a l i z i n g y o u r p h o n e
eud-1290/1.0 – R1.0 – 01.2011
75
Changing the User PIN
You want to change the PIN used to lock/unlock your phone (see Chapter "Locking
your phone" , page 65 and "Unlocking your phone" , page 66 ).
The digit combination "0000" is set as default. You can select any 2 to 10-digit combi-
nation for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default
setting.
Notes:
• Your user PIN applies to all your phones.
• Do not confuse the User PIN with the Admin PIN (see chapter
"Changing the
Admin PIN" , page 76 ).
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
General
Scroll to General and press the Select softkey.
New user PIN
Scroll New user PIN and press the Select softkey.
➔
The display shows User PIN .
Enter the old PIN and confirm with the Ok softkey.
➔
The display shows New user PIN .
Enter the new PIN and confirm with the Ok softkey.
➔
The display shows Confirm user PIN .
Enter the new PIN a second time and confirm with the Ok softkey.
➔
The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with */# procedure *47 (see "User’s Guide */#
Procedures" on the Aastra document portal: www.aastra.com/docfinder ).