AASTRA DT4x2 for MD Evolution User Guide EN - Manual (Page 39)

39 MD Evolution – Cordless DT412 / DT422 / DT432
Outgoing Calls
Notes:
Correct a wrong entry by pressing
C
(see display). If you
decide not to make the call while keying in the number,
press
C
(see display) to stop.
It is possible to turn on/off the tone sender in a predialed
number by making a long press on the
*
key (e.g. when
calling telephone banks). Tone sender on will be indicated
with a
T
in the number, and off with
-
. If a pause is required
in the number, it is added by making a long press on the
#
key. The pause is indicated with a
P
in the number.
You can make your calls faster by programming Soft/Hot
keys with frequently used numbers. See section “ Program
a Hot key or a Soft key with a phone number ” on page 132.
Off hook
If you prefer to dial a number off hook: æ
Press.
Dial tone. å
Key your number on-line.
Notes:
When dialling this way, you cannot press
C
(see display) to
erase digits.
The number is not stored in the call list.
Handsfree
While you are waiting for a connection, dial tone or during the call: ä
Press the middle Soft key.
You are connected to the caller via the loudspeaker and
microphone.
Note: Which key to press depends on the answering
method used, to change the answering method see section
“ Answering Method ” on page 36.
End the call æ
Press.
The display shows the duration of the call.