AASTRA 4222 Office for MX-ONE (TSE) User Guide EN - Manual (Page 76)

Settings
Dialog 4220 Lite/Dialog 4222 Office 76
To enter notes
In melody mode, the key pad is used to enter notes, pauses, etc. A
maximum of 40 notes can be programmed for incoming calls, and 20
notes for recalls.
This is how the keys are used:
Press to insert notes (1–9).
Note: A short press gives a short note, a long press gives a long
tone (displayed by a capital letter), +c and +d means the higher
octave.
*
Press to insert a short pause (p).
Hold to get a long pause (P). Repeat to get a longer pause (pp...p).
0
Press to get a higher octave for the inserted note.
A + is shown in front of the note to indicate the higher octave.
Example: 30 to get +e
#
Press to increase or decrease the pitch for the inserted note.
Press once for sharp pitch, twice for flat pitch and three times to get the
normal pitch.
ì
Press to move the cursor to the left or to the right.
Keep pressed to go to the beginning or to the end.
Â
Press to listen to the entered notes.
í
Press to erase the note to the left of the cursor.
Keep pressed to erase all the notes.
Melody example:
James Bond theme programmed for internal calls:
C d d D D pp C C C C #d #d #D #D pp D D D ##A G pppp G F G
Enter the notes.
Grey digit = Long press.
Note: The
#
Key (to get a sharp or flat tone) is pressed after
the note, but is displayed before the note.