AASTRA 4222 Office for MX-ONE (TSE) User Guide EN - Manual (Page 46)

Call Forwarding
Dialog 4220 Lite/Dialog 4222 Office 46
To activate or change to another profile from your office phone
*10*
Dial.
(
1
–
5
)
Press the search profile digit.
# í
Press.
The display shows the chosen search profile digit.
Notes:
You can also activate and change to another profile by
programming one function key/search profile (the function keys
has to be pre-assigned by your system administrator). When the
search profile is active the key lamp is on. See section
“ Settings ” on page 65 .
When another party is included in the activated profile, a
colleague or an operator, etc., always remember to inform them
about your absence. If you have a Voice Mail application that is
included in the activated profile, always update your greeting
with Absence Information.
To cancel from your office phone
#10#
Dial.
í
Press.
Note: If you have activated a profile via a function key, you can
press this key instead of using the procedure above.
To design and order your search profiles
The search profiles are installed or changed by your system
administrator. In order to set up your profiles, copy the setting form, fill
in your new or changed profiles and give it to your system
administrator.
Note: If a profile handling application is connected to your
system, you can edit profiles via your Intranet. See separate
instructions for the application.