AASTRA 4222 Office for MX-ONE (TSE) User Guide EN - Manual (Page 47)

47 Dialog 4220 Lite/Dialog 4222 Office
Call Forwarding
Important notes when designing your search profiles:
• Avoid ring times longer than 45 seconds for your profiles.
Usually the caller hangs up after 3-6 ring signals. If you need a
longer ring time, the maximum time is 60 sec.
• Consider the time you need to react and answer on each answering
position in your profile.
You might need up to 15 seconds to react and answer a call on a desk
or cordless phone and 20–25 seconds for a mobile phone.
• There must be an answering position at the end of every profile
(Voice Mail or operator/secretary).
If not, calls might end up unanswered.
• Consider what should happen while you are busy on a phone.
The available options are:
– Activate Free on 2nd (if available)
– Diversion to Voice Mail (if available)
– Diversion to the operator
• If an answering machine, a fax or other answering device is used as
an early answering position, it might interrupt the searching.
Disconnect the answering device, or design the ring times so they do
not affect the searching.
• If your system admits just one single personal profile, design the
profile only with your 2–3 most frequently used positions.
If you add more numbers, there is a risk that the caller hangs up
before a latter position is called.
• If your system admits 1–5 personal profiles, design the different
profiles to fit your most frequently used positions.
Make sure you use as few answering positions as possible for each
profile. Profile examples:
– In office
– At home
– Traveling
– Absent/not reachable