AASTRA 4222 Office for MX-ONE (TSE) User Guide EN - Manual (Page 38)

During Calls
Dialog 4220 Lite/Dialog 4222 Office 38
Send Caller Identity Code at transfer
When transferring a call you can send the caller’s Identity Code or
number to the receiver’s display.
You have a voice connection with an external party on Line 1.
Ô
Inquiry Press to put the call on hold.
Note: You can also press Line 2.
*77*
Dial.
z #
Dial the caller’s Identity Code or number and press.
z
Call the second party.
Ô
Transfer Press before or after answer.
The ongoing call is transferred with the caller´s Identity Code or
number.
Note: You can only use this feature if the receiver’s phone is
programmed to handle Identity Codes. This feature is only
available in newer versions of the exchange.
Dialing during a connected call
When calling interactive teleservices, e.g. telephone banks, you need to
use Dual Tone Multi Frequency (DTMF) signals. If your exchange has
not been programmed to automatically convert your entered digits into
DTMF signals, you need to activate the feature during the call.
During an ongoing call:
9 z
Press and dial the requested digits.
Entered digits are transmitted as DTMF signals.
Note: Finland, press
1
and dial the required digits.