AASTRA 7433ip for MX-ONE User Guide EN - Manual (Page 87)

IP P HONE FOR MX-ONE™
87 6/1553-DBC 433 01 Uen D 2012-02-22
13.2.1 Changing Ring Signals for Incoming Calls
A ring signal can be either a traditional ring signal or a melody that you
download from a server.
To change the ring signal for an incoming call, do the following:
1. Press .
2. Select Sounds and press Select.
3. Select Ring Signals and press Select.
Default Ring Signals is selected.
4. Press Select.
5. Scroll with the navigation keys to the ring signal or melody you wish
to use and press Select.
Note: To listen to a ring signal or melody before selecting it,
press more... and then Play.
6. Press Yes to confirm.
13.2.1.1 Downloading Melodies
Instead of standard ring signals, you can download up to 10 melodies to
your phone.
To download a melody from a specified server, do the following:
1. Press .
2. Select Sounds and press Select.
3. Select Ring Signals and press Select.
Default Ring Signals is selected.
4. Press Select.
5. Navigate to Melody 1 (empty) and press Add.
A list of all available melodies is displayed.
6. Select a melody and press Select.
Note: If you wish to listen to a signal or melody before selecting
it, press more... and then Play. When you are done listening to a
signal, press Stop.