AASTRA 7433ip for MX-ONE User Guide EN - Manual (Page 62)

6/1553-DBC 433 01 Uen D 2012-02-22 62
C ONTACTS
3. Select Erase to erase one letter at the time, or Erase all to erase
the whole entry.
4. Make the changes, and press OK.
If you wish to edit the number or ring signal, press more....
5. Press Done to save and return to the contact list.
8.3.2 Editing the Number
To edit a contact number, do the following:
1. Select Edit Number, and press Select.
2. Press more....
3. Select Erase to erase one number at the time, or Erase all to erase
the whole entry.
4. Enter the correct phone number, and press OK.
5. Press Done to apply the change, and to return to the contact list.
8.3.3 Editing the Ring Signal
To edit a ring signal, do the following:
1. Select Edit Ring, and press Select.
2. Scroll to see the list of available ring signals.
To listen to a signal before selecting it, press more... and then Play.
3. Select the desired ring signal and press Set.
4. A confirmation message is displayed.
5. Press Yes to confirm or No to cancel.
6. Press Done to return to the contact list.