AASTRA 7433ip for MX-ONE User Guide EN - Manual (Page 70)

6/1553-DBC 433 01 Uen D 2012-02-22 70
M ESSAGES
2. Select My VoiceMail, and press Call.
If the following message is displayed, the voice mail number should
be configured to Call: “Not programmed! Program VoiceMail?” See
10.1.2 Programming VoiceMail Number on page 70.
3. Follow the recorded instructions.
10.1.2 Programming VoiceMail Number
If you receive the following message when you are trying to call your
VoiceMail, you should program the VoiceMail: “Not programmed!
Program VoiceMail?”
To program a VoiceMail number, do the following:
1. Press Yes.
2. Enter the VoiceMail number.
If you do not know the number to the VoiceMail, please contact the
system administrator.
3. Press Done.
10.1.3 Programming My Messages Number
If your phone can be connected to an additional message server, you
can program the number of this server to My Messages.
To program a number for My Messages, do the following:
1. Press .
2. Select My Messages, and press Call.
3. If the following message is displayed, the voice mail number should
be configured to Call: “Not programmed! Program Messages?”
4. Press Yes.
5. Enter the number to the message server
If you do not know the number to the message server, contact the
system administrator.
6. Press Done.