Garmin RINO 530HCx - Manual (Page 35)

Rino 520HCx and 530HCx Owner’s Manual 2
B
aSIc
o
peratIon
Using Sight ‘N Go
Available for the Rino 530HCx only, use this feature to
visually locate an object and navigate to it.
To use Sight ‘N Go to navigate:
1. Use the Page/Quit key to access the Compass
page and then use the Rocker to access the option
menu.
2. Use the Rocker to select Sight ‘N Go and press in.
The compass ring with pointer is in-line with the two
sighting marks on the case.
3. Hold the Rino 530HCx at eye level and line up
the two sighting marks on the case with a distant
object. Press Enter to lock direction. The Sighting
page opens.
4. Select Set Course to open the Compass page.
OR
5. Select Project Waypoint to open the Project
Waypoint page. Enter an estimated distance and
then select GoTo to navigate to the point using the
Map page.
6. Follow routing directions on the Map page or use
the compass for bearing or course navigation.
Rino 530HCx held level
for Sight ‘N Go
Sighting marks
To view your destination as a waypoint, select
Project Waypoint and press Enter. To re-sight the
destination, press Enter when Re-Sight is selected.
Calibrating the Compass
When you first use the Rino 530HCx, the electronic
compass must be calibrated outdoors and away from
metal objects. The accuracy of the electronic compass
is adversely affected if the unit is held near items that
generate magnetic fields. Recalibrate after significant
events such as location or temperature changes.