Garmin GPS 150 - Manual (Page 73)

The GPS 150 can also interface to another GPS 150 to transfer user waypoints,
settings and other user information between units. These operations are performed
from the Data Transfer page.
To receive user data from another GPS 150:
1. Press
S
and rotate
O
until the Data Transfer page is displayed.
2. Press
C
and rotate
O
to highlight ‘Receive?’. Press
E
.
You may choose to ‘Update user data?’ or ‘Replace user data?’. Updating user data
will update ONLY the data received from the other GPS 150, and other data will not
be affected. Replacing user data will erase the user data contained in the GPS 150 and
replace it with data received from the other GPS 150. This only applies to data which
can be updated by the user, such as user waypoints and routes.
3. Use
O
to select either ‘Replace user data?’ or ‘Update user data?’. Press
E
.
The GPS 150 will now begin receiving data from the other GPS 150. Press E to stop.
To download user data to another GPS 150:
1. Press
S
and rotate
O
until the Data Transfer page is displayed.
2. Press
C
and rotate
O
to highlight ‘Download?’. Press
E
.
The GPS 150 will now begin transmitting data to the other GPS 150. Press
E to stop.
63
REFERENCE
Data Transfers
Section
5
Choosing to update or replace user data.
Data Transfer page
Getting ready to download data.
150man rev E 7/24/98 3:11 PM Page 63