Garmin GPS 150 - Manual (Page 36)

To choose a waypoint type (for viewing information):
1. Press
W
and, if necessary, rotate
O
until the Waypoint Menu page is displayed.
2. Press
C
and rotate
O
until the desired waypoint type is highlighted. Press
E
.
Airports, VORs and NDBs may be entered by either the identifier, the facility
name, or the city and state in which it is located. Intersections and user waypoints
must be entered by identifier.
To enter waypoints by identifier:
1. Use
K
and
O
to enter the waypoint identifier in the first field on the page.
As the identifier is entered, the GPS 150 will display any waypoint with the same
identifier you have entered so far. When the desired waypoint is displayed, press C
to remove the cursor.
To obtain waypoint information by entering the facility name of an airport, VOR or
NDB, or the city in which an airport, NDB or VOR is located:
1. Press
W
and rotate
O
until the Waypoint Menu is displayed.
2. Press
C
and rotate
O
to highlight the type of waypoint you wish to view.
3. Press
E
to accept the waypoint type.
4. Use
O
to highlight the middle field to enter the city, or:
5. Use
O
to highlight the bottom field to enter facility name, or VOR/NDB name.
6. Use
K
and
O
to enter the location or the name (do not use punctuation).
7. Press
C
to remove the cursor when the desired waypoint is displayed.
26
REFERENCE
Obtaining Waypoint
Information
Section
2
Waypoint Menu page
Entering an airport by identifier.
Entering an airport by city.
150man rev E 7/24/98 3:10 PM Page 26