Garmin GPS 150 - Manual (Page 29)

5. Use
K
and
O
to enter the checklist item. Press
E
.
6. You may repeat step 5 to enter more items, or press
C
when you are finished.
To execute a checklist:
1. Press
N
and rotate
O
until NAV Menu 1 is displayed.
2. Press
C
and rotate
O
until ‘Chklist?’ is highlighted. Press
E
.
3. Scroll through available checklists using
K
.
4. Press
C
and use
O
to highlight the checklist you would like to see. Press
E
.
5. Press
E
to check off list items.
The final NAV page is NAV Menu 2. NAV Menu 2 contains the following functions:
• Approach timer • Clock (Date and time)
• Trip Timer • GPS Planning
• Scheduler • Sunrise and sunset calculations
The approach timer acts as either a count up or a count down timer.
To activate/change/view the approach timer:
1. Press
N
and rotate
O
until NAV Menu 2 is displayed.
2. Press
C
and rotate
O
until ‘Appr Time?’ is highlighted. Press
E
.
3. Rotate
K
to select either ‘Count up’ or ‘Count down’. Press
E
.
4. Use
K
and
O
to set the time to begin counting from. Press
E
.
5. Rotate
O
to select the function you would like to perform, ‘Start’, ‘Stop’, or ‘Reset’.
Press
E
. Reset returns the timer to the original count up/count down time.
When the count down timer reaches zero, you will be informed with a ‘Timer
expired’ message. It will then begin to count up, to indicate how long it has been
since it expired.
19
REFERENCE
Checklists, NAV Menu 2 &
Approach Timer
Section
1
NAV Menu 2
Executing a checklist.
Approach timer
150man rev E 7/24/98 3:10 PM Page 19