Garmin GPSMAP 230 - Manual (Page 66)

Active Route Page Options
The following options are available from the active route page:
• Invert Route?— activates the active route in reverse order and begins navigation.
• Activate Route?— reactivates the active route and selects the route leg closest to
your current position as the new active leg.
• Edit On Map?— allows you to edit the selected route on map (see pages 48-49 for
specific instructions).
• Clear Route?— allows you to clear all waypoints from the selected route.
• Copy Route?— allows you to copy the waypoints of the active route to another
route.
• Change Data Fields?— allows you to define the data displayed in the distance and
ETE fields. Four data options are available:
• DIS– distance to active wpt • DTK– desired track
• ETE– estimated time enroute • ETA– estimated time of arrival
• Restore Defaults?— resets all active route page options to the factory settings.
• Deactivate Route?— stops navigation of the route you are currently navigating.
• Setup Simulator?— allows you to define speed, course, and position values while in
simulator mode. See the Getting-Started Tour for more on using the simulator mode.
54
The ‘Change Data Fields?’ option lets you specify
what information is displayed for each route way-
point. Four data options are available: distance,
desired track, and ETA or ETE to each route way-
point.
SECTION
8
ROUTES
Active Route
Page Options
update on 230.qxd 1/12/00 11:22 AM Page 54