Garmin GPSMAP 230 - Manual (Page 16)

A B
The GPSMAP 230’s Satellite Page provides a visual reference of satellite acqui-
sition and receiver status, with a signal strength bar graph and a satellite sky view
in the center of the page. Each page of the GPSMAP 230’s system also features an
options page, which gives you access to other functions and features that relate to
the specific page you are viewing. To get a feel for how the options pages work,
lets put the GPSMAP 230 into simulator mode.
To place the GPSMAP 230 in simulator mode:
1. From the Satellite Page, press the O key. The options page will appear, displaying a
menu of options and functions for the Satellite Page.
2. Use the UP or DOWN arrow of the R keypad to highlight the ‘Start Simulator?’ option
and press T .
3. Press the T key to confirm the simulator warning.
Once the simulator has been started, the status field at the top of the page will
display a ‘Simulating Navigation’ status, and you’re ready to continue the rest of
the tour. Keep in mind that the GPSMAP 230 does not track satellites in simulator
mode, and should never be used for actual navigation. All the waypoint and route
planning done in simulator mode will still be retained in memory for future use.
4
GETTING STARTED
Satellite Page & Simulator Mode
A. To start the simulator, confirm the simulator
warning. Simulator mode should never be used
for actual navigation.
B. Whenever the GPSMAP 230 is in simulator
mode, a ‘Setup Simulator?’ and an ‘Exit
Simulator?’ option will appear on the options
page.
Status Field
Horizontal Accuracy Satellite
Sky View
Signal Strength
Indicators
Status Bar
Dilution of Precision
update on 230.qxd 1/12/00 11:22 AM Page 4