Garmin GNS 430 User Manual
Page 25

GNS 430(A) Pilot’s Guide and Reference
190-00140-00 Rev. P
1-17
SECTION 1
INTRODUCTION
To select a nearby airport as a direct-to
destination from the Nearest Airport Page:
1) From the Nearest Airport Page, press the small
right knob to activate the cursor.
2) Turn the large right knob to select the desired
airport from the list.
3) Press the Direct-to Key, the ENT Key twice to
navigate to the nearby airport.
To select a nearby airport as a direct-to
destination from the Airport Information
Page:
1) Press the Direct-to Key, then press the ENT
Key (Figure 1-27).
Figure 1-27 ‘Activate?’ Highlighted
2) Press the ENT Key again to navigate to the
nearby airport.
Nearest (NRST) Airspace Page
The last page in the NRST group, the Nearest Airspace
Page (Figure 1-28), provides information for up to nine
controlled or special-use airspaces near or in the flight
path. Airspace information appears on this page based on
the same criteria used for airspace alert messages:
• If the projected course will take the aircraft inside
an airspace within the next ten minutes, the
message ‘Airspace ahead -- less than 10 minutes’
appears.
• If the aircraft is within 2 nm of an airspace and the
current course will take it inside of the airspace,
the message ‘Airspace near and ahead’ appears.
• If the aircraft is within 2 nm of an airspace and
the current course will not take it inside of the air-
space, the message ‘Near airspace less than 2nm’
appears.
• If the aircraft has entered an airspace, the message
‘Inside airspace’ appears.
Figure 1-28 Nearest Airspace Page