Garmin GNS 430 - Manual (Page 122)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 7-6
SECTION 7
WPT PAGES
To adjust the range of the map image:
1) Press the down arrow of the RNG Key to
display a smaller map area.
2) Press the up arrow of the RNG Key to display
a larger map area.
The following descriptions and abbreviations are used
on the Airport Runway Page:
• Type - Usage type: Public, Heliport, Military, or
Private
• Surface - Runway surface types include: Hard,
Turf, Sealed, Gravel, Dirt, Soft, Unknown, or
Water
• Lighting - Runway lighting types include: No
Lights, Part Time, Full Time, Unknown, or
Frequency (for pilot-controlled lighting)
7.4 AIRPORT FREQUENCy PAGE
The Airport Frequency Page displays radio frequencies
and frequency types for the selected airport, as well as
sector and altitude restrictions (where applicable). If
the selected airport has a localizer-based approach,
the localizer frequency(ies) is also listed on the Airport
Frequency Page (Figure 7-12). The Airport Frequency
Page may be used to quickly select and tune a COM or
VLOC frequency.
Figure 7-12 Airport Frequency Page
Airport Identifier,
Symbol, and Type
Frequency Frequency Type
Scroll
Bar
Usage Restrictions
Information
Number of Pages in
Current Page Group
Position of
Current Page
within Current
Page Group
Current Page
Group
To scroll through the frequency list and
tune to a desired frequency on the list:
1) Press the small right knob to activate the
cursor.