Garmin GNS 430 - Manual (Page 172)

GNS 430(A) Pilot’s Guide and Reference 190-00140-00 Rev. P 10-14
SECTION 10
AUX PAGES
Utility Page: Checklists
To create a checklist:
1) Select ‘Checklist’ from the Utility Page (Figure
10-33), using the steps described at the
beginning of this section (10.3). Press the ENT
Key to display a list of checklists.
Figure 10-33 Checklists Highlighted
2) Press the MENU Key to display an options
menu. Turn the large right knob to select
‘Create New Checklist?’ and press the ENT
Key.
3) Use the small and large right knobs to enter
the name of a checklist. Press the ENT Key
when finished. Up to nine different checklists
can be created and stored in the GNS 430.
4) Use the small and large right knobs to enter
each checklist item, followed each time by the
ENT Key. (Each checklist may contain up to 30
line items of as much as 16 characters long.)
To execute a checklist:
1) With the Checklists Page displayed (Figure
10-34), turn the large right knob to select the
desired checklist and press the ENT Key.
Figure 10-34 Desired Checklist Highlighted
2) As each checklist item is completed, press the
ENT Key to move to the next item on the list
(Figure 10-35).
Figure 10-35 Desired Checklist Item Highlighted
To edit a checklist:
1) With the Checklists Page displayed, turn the
large right knob to select the desired checklist
and press the ENT Key.
2) Press the MENU Key to display an options
menu. Select ‘Edit Item?’ and press the ENT
Key, then use the small and large right knobs
to edit each checklist item. Press the ENT Key
when finished.