Garmin GNS 430 User Manual
Page 24

GNS 430(A) Pilot’s Guide and Reference
190-00140-00 Rev. P
1-16
SECTION 1
INTRODUCTION
To display the NRST pages:
1) If necessary, press and hold the CLR Key to
select the NAV group and display the Default
NAV Page.
2) Turn the large right knob to select the NRST
Page Group, as indicated by ‘NRST’ appearing
in the lower right corner of the screen.
3) Turn the small right knob to select the desired
NRST Page.
To display a list of nearby airports:
1) Turn the large right knob to select the NRST
Page Group and (if needed) the small right
knob to select the Nearest Airport Page (Figure
1-24).
Figure 1-24 Nearest Airport Page
2) To scroll through the list, press the small right
knob, then turn the large right knob (Figure
1-25)
Figure 1-25 Scrolling the Nearest Airport List
To view additional information for a nearby
airport:
1) Press the small right knob to activate the
cursor.
2) Turn the large right knob to select the desired
airport from the list.
3) Press the ENT Key to display waypoint (WPT)
information pages for the selected airport
(Figure 1-26).
Figure 1-26 Airport Location Page
4) To display runway and frequency information,
press the small right knob to remove the
cursor and turn the small right knob to display
the desired information page.
The Nearest Airport Page may be used in conjunction
with the Direct-to Key to quickly set a course to a nearby
facility in an in-flight emergency. Selecting a nearby
airport as a direct-to destination overrides the flight plan
or cancels a previously selected direct-to destination. The
pilot still has the option of returning to the flight plan
by cancelling the direct-to; see Section 4.1, Cancelling
Direct-to Navigation.