ACU-RITE Micro-Line M - Manual (Page 45)

42 MICRO-LINE Reference Manual
SCALE INSTALLATION
• Understand your mounting requirements.
• Mount with lipseals down and away from the work area.
• Brackets should be kept as short and rigid as possible.
• Clean all mounting surfaces.
• Ensure the correct length scale is being used for the total
machine travel.
Do not remove alignment brackets until instructed.
Never mount with lipseals upward or toward work area.
Mounting Preparation
Equipment travel must not exceed scale measuring length.
MLMmanual.QXD 2/12/02 5:01 PM Page 17