Rmc 7152, Pc 5172 – Acnodes PC 5172 User Manual

Page 53

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7152

14” short depth server

RMC 7152

14” short depth server

PC 5172

17-inch sunlight readable touch panel PC

ATA/IDE Configurations [Enhanced]

Use the ATA/IDE Configurations option to configure the ATA/IDE controller.

Disabled

Disables the on-board ATA/IDE controller.

Compatible

Configures the on-board ATA/IDE controller to be in compatible mode. In this mode, a SATA channel will

replace one of the IDE channels. This mode supports up to 4 storage devices.

Enhanced

DEFAULT

Configures the on-board ATA/IDE controller to be in

Enhanced mode. In this mode, IDE channels and SATA channels are separated. Some legacy OS do not support this mode.

Configure SATA as [IDE]

The "Configure SATA as" option sets the configuration of the SATA ports.

IDE

DEFAULT

The SATA drives are configured as IDE devices and no enhanced functions are available

Configure SATA Channels [IDE]

The "Configure SATA Channels" option sets the order in which the IDE devices are configured.

Before PATA

DEFAULT

The SATA drives are configured before the PATA drives

Behind PATA

The SATA drives are configured after the PATA drives

Legacy IDE Channels [PATA Pri, SATA Sec]

SATA Only

Only the SATA drives are enabled.

PATA Pri, SATA Sec

DEFAULT

The IDE drives are enabled on the Primary IDE channel. The SATA drives are enabled

on the Secondary IDE channel.

PATA Pri., PATA Sec

The IDE drives are enabled on the primary and secondary IDE channels. SATA drives are

disabled.

PATA Only

Only the PATA drives are enabled. IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the status of the auto detected IDE
devices. The following IDE devices are detected and are shown in the IDE Configuration menu:

Primary IDE Master

Primary IDE Slave

The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the IDE devices installed in the system. If
an IDE device is detected, and one of the above listed four BIOS configuration options are selected, the IDE configuration
options shown in Section 5.3.2.1 appear.