Pc 5150, Pc 5172 – Acnodes PC 5172 User Manual
Page 30
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
30
PC 5172
17-inch sunlight readable touch panel PC
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218,
4.1 Installation Precautions
When installing the PC 5172 , please follow the precautions listed below:
Turn power off: When installing the PC 5172 make sure the power is off. Failing to turn off the power may cause severe
injury to the body and/or damage to the system.
Certified Engineers: Only certified engineers should install and modify on-board functions.
Mounting: The PC 5172 is a heavy device. When mounting the system onto a rack, panel, wall or arm please make
sure that at least two people are assisting with the procedure.
Anti-static Discharge: If a user open the rear panel of the PC 5172 , to configure the jumpers or plug in added periph-
eral devices, ground themselves first and wear and anti-static wristband.
4.2 Preinstalled Components
The following components are all preinstalled.
Motherboard
TFT LCD
Touch screen
Power switch
Power supply
Inverter board
PCI riser card
System cooling fans
Preinstalled OEM customizations may include the following.
CPU
HDD
CD drive
DIMM
Removal and reinstallation of some of the components are described in Chapter 4.
4.3 Installation and Configuration Steps
The following installation steps must be followed.
Step 1: Unpack the PC 5172 .
Step 2: Set the jumper settings.
Step 3: Install HDD, CompactFlash® and CD drive.
Step 4: Mount the PC 5172 flat panel PC.
Step 5: Connect peripheral devices to the bottom panel of the PC 5172 .
Step 6: Configure the system.