Rmc 7152, Pc 5192 – Acnodes PC 5192 User Manual
Page 81
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
81
PC 5192
19-inch sunlight readable touch panel PC
Flat Panel Type [By Jumper]
Use the Flat Panel Type is set using the onboard jumper settings. The jumper settings can be found in the Installation and
Configuration chapter.
PID Current Jumper Setting [1-1024x768x24]
The PID Current Jumper Setting shows the current setting of the flat panel resolution jumper.
Internal Graphics Mode Select [Enable, 8 MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory that can be used by the Internal graph-
ics device.
Disable
Enable, 1 MB 1 MB of memory used by internal graphics device Enable, 8 MB DEFAULT 8 MB of memory used by internal
graphics device Disabled Scaling is disabled.
5.7.2 Southbridge Configuration
The Southbridge Configuration menu (BIOS Menu 24) allows the Southbridge chipset to be configured.
BIOS Menu 24:Southbridge Chipset Configuration
Spectrum [Disabled]
Use the Spectrum option to reduce the EMI. Excess EMI is generated when the system clock generator pulses have extreme
values. Spreading the pulse spectrum modulates changes in the extreme values from spikes to flat curves, thus reducing the
EMI. This benefit may in some cases be outweighed by problems with timing-critical devices, such as a clock-sensitive SCSI
device.
Disabled
DEFAULT
EMI not reduced
Enabled
EMI reduced