Rmc 7152, Pc 5192 – Acnodes PC 5192 User Manual

Page 101

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7152

14” short depth server

RMC 7152

14” short depth server

101

PC 5192

19-inch sunlight readable touch panel PC

Step 3: Unfasten the elevated platform screws on the bottom panel (Figure 7-4).

Figure 7-4: Bottom Panel Elevated Platform Screws

Step 4: Unfasten the internal elevated platform screws (Figure 7-5).

Figure 7-5: Internal Elevated Platform Screws

Step 5: Slide the elevated platform out of the chassis.

7.6 PSU Module Replacement

Please read the warnings at the beginning of Section 4.3 before attempting to access any PC 5192 internal components. If the
PSU module has been damaged it must be replaced. To replace the PSU module, please follow the steps below.

7.6.1 Remove the Old PSU

Step 1: Remove the back cover (Section 4.4).

Step 2: Detach and remove the elevated platform (Section 7.5).

Step 3: Disconnect all PSU connections including those to the motherboard (Figure 7-6) and any disk drives.