Accusys StorConn GUI User Manual
Page 21
http://www.accusys.com.tw
20
User’s Manual
5. Configuring mail alert settings.
Before installing StorConn, you
must set the mail alert values. In
the event of a RAID malfunction,
an alert email will be sent to the
RAID administrator at a specified
address.
6. Enter the following values:
Mail Server:
Enter the IP address of
the mail server in your network
Sender: Enter an email address
to identify the source of the alert
email
Receiver: Enter up to three
e-mail addresses to which an
email will be sent. Please add
semicolon between mail
address.
Notify time (minutes): Enter the
interval time between successive
alert email dispatches (minimum
value: 1 / maximum value:
65536)
COM Port 1~4:
Mac users should
keep the default setting
.
7. After fill up the above information,
click on Save to go to next step.
8. Click on Close to complete the
installation.