Yamaha PSR-540 - Manual (Page 95)

95
93
10
Enter the desired name for the bank.
Use the keyboard to enter the name (page 21).
Up to eight letters or characters can be used.
11
Press the [RECORD] button to exit from the Record mode.
Clearing User Pad Data
1
-
7
Use the same operation as in “Chord Match” above.
8
Select “Clear”.
Use the data dial, the [+/YES] button or the [-/NO] button.
10
Select the Pad number to be cleared.
Use the data dial, the [+/YES] button or the [-/NO] button.
To clear the data from all four pads, select “All”.
11
Press the [NEXT] button.
12
Execute the Clear operation.
Press the [+/YES] button to execute the Clear operation.
To abort the Clear operation, press the [-/NO] button.
13
Press the [RECORD] button to exit from the Record mode.
Multi Pad Recording
P.Name=UserPad2
Clr Pad=Pad1
Clear OK?
9
Press the [NEXT] button.
Ed Menu=Clear
The Clear operation is completed...
Completed