Yamaha PSR-540 - Manual (Page 118)

118
116
Other Functions (Utility)
This section of the manual covers some important functions of the PSR-540 that have not been ex-
plained in previous sections. These are all combined in the Utility menu of the “Function” section.
• Metronome ................................................................................................. page 118
• Part Octave ................................................................................................ page 118
• Master Tuning ............................................................................................. page 119
• Scale Tuning ............................................................................................... page 119
• Split Point ................................................................................................... page 119
• Touch Sensitivity ........................................................................................ page 120
• Voice Set .................................................................................................... page 120
• Footswitch .................................................................................................. page 121
• Pitch Bend Range ...................................................................................... page 122
Metronome
When this is set to “ON,” the metronome sounds at the set tempo for the following
conditions.
• Accompaniment playback
• Song playback
• Synchronized start standby
• Record standby
• Recording
• Turn Metronome ON or OFF with the data dial, the [+/YES] button or the
[-/NO] button.
1
Press the [FUNCTION] button.
Each of the above functions can be set as described below.
The operations for each function corresponding to step #6 are covered in the following explanations.
Metronome =On
F4 Utility
Utility=Metronom
Metronome =Off
2
Select “Utility.”
3
Press the [NEXT] button.
4
Select a function.
5
Press the [NEXT] button.
6
Set the value.
• The Metronome cannot be
turned on when free-tempo
song data is selected in the
Song mode.
The tempo setting of some
commercially available songs
is fixed. These songs are
called “free-tempo software.”
When playing back free-
tempo song data on the
PSR-540, the Tempo display
shows “- - -” and the beat
display does not flash. Also,
the measure number in the
display does not match the
actual measure number of
playback, and only gives you
an indication of how much of
the song has played back.